HACT121 : Harness Assembly Continuity Tester
HA_CT_121 tester is used for harness sub assembly guiding, followed by testing, for one to one circuits during harness manufacturing. This model supports harness up to 8 circuits. The number of circuits can be increased using extension unit.
- Stand-alone system
- Built for rough industrial environments
- Finds Short Harness
- Finds Open terminal of Harness
- Finds okay Harness with LED status
- Help to insert wires in to empty coupler by guiding LED’s
- High speed operation, fast and reliable testing
- Durable and reliable tester
| HA_CT_121 | |
|---|---|
| Test Point Capacity | 8 circuits i.e. 16 points |
| Expandable in step of | Not Available |
| Components | Not Available |
| Diode testing | Not Available |
| Test Voltage | 5 V DC. |
| Test Current | Test current: In mill Amperes. |
| Test Speed | 1 seconds |
| Display | 16*1 character LCD display with backlit |
| Audible Tones | Buzzer audio output on pass |
| Number of Harness Programs | 1 location available. |
| Serial Ports | 1 port available |
| Printer Port | 9 pin D serial port for printer |
| Test Point Interface | Directly connected to fixture as per connector |
| Input Power | Supply Voltage: 230 V AC, 50 Hz. +-10%. Power consumption: Maximum 5 Watts. Fuse: 750 mA, normal |
| Size (W x D x H) | 175L x 95H x 210D |
| Weight | Approximately 2 Kgs. |
| Operating Parameters | Working temperature: 0 to 50 degree C. |
| Warranty | Conditional for a period of 12 months only for new equipment/products |
| User Authentication | Key Lock |
| Display Faults | Errors are displayed like open, short using point number |
| No. of Stages Testing | Single stage |
| Relay output | Potential free Relay output 1no up to 230V AC, 5A load. |
| Barcode Scanning | Not Available |
| Application | HA_CT_121 testeris basically used for harness sub assembly guiding, followed by testing, for one to one circuits during harness manufacturing. This model supports harness up to 8 circuits. |
While contacting our team for placing an order or for enquiry, let us know about:
- 1. Tester Model
- 2. Number of points.