INT-CT-121: Intermittent Tester
Intermittent Testing (What is intermittent testing?)
INT_CT121_32 tester tests a cable for correct continuity and then for intermittent faults. Any asynchronous occurance of intermittent fault is captured and indicated. Testing can be continued or can be aborted.
- Stand-alone system
- Precise testing results
- User role based access
- Built for rough industrial environments
- Tests a cable for correct continuity and then for intermittent faults
- Any asynchronous occurrence of intermittent fault is captured and indicated
INT-CT-121_32 | INT-CT-121_64 | |
---|---|---|
Test Point Capacity | 32 circuits i.e. 64 points | 64 circuits i.e. 128 points |
Expandable in step of | Not Available | Not Available |
Components | Not Available | Not Available |
Diode testing | Not Available | Not Available |
Test Voltage | 5 V DC. | 5 V DC. |
Test Current | Test current: In mill Amperes. | Test current: In mill Amperes. |
Test Speed | 1 seconds | 1 seconds |
Display | 16*1 character LCD display with backlit | 16*1 character LCD display with backlit |
Audible Tones | Buzzer audio output on pass | Buzzer audio output on pass |
Number of Harness Programs | 25 locations available. | 25 locations available. |
Serial Ports | Not Available | Not Available |
Printer Port | Not Available | Not Available |
Test Point Interface | Out put of consist of 37 pin D to 36 Pin centronics M connector | Out put of consist of 37 pin D to 36 Pin centronics M connector |
Input Power | Supply Voltage: 230 V AC, 50 Hz. +-10%. Power consumption: Maximum 5 Watts. Fuse: 750 mA, normal | Supply Voltage: 230 V AC, 50 Hz. +-10%. Power consumption: Maximum 5 Watts. Fuse: 750 mA, normal |
Size (W x D x H) | ||
Weight | Approximately 5 Kgs. | Approximately 5 Kgs. |
Operating Parameters | Working temperature: 0 to 50 degree C. | Working temperature: 0 to 50 degree C. |
Warranty | Conditional for a period of 12 months only for new equipment/products | Conditional for a period of 12 months only for new equipment/products |
User Authentication | Not Available | Not Available |
Display Faults | Errors are displayed like open, short using point number also check intermittent fault in cable | Errors are displayed like open, short using point number also check intermittent fault in cable |
No. of Stages Testing | Single stage | Single stage |
Relay output | Potential free Relay output 1no up to 230V AC, 5A load. | Potential free Relay output 1no up to 230V AC, 5A load. |
Barcode Scanning | Not Available | Not Available |
Application | Specially design for intermittent fault checking in harness with one to one connection (like FRC) with continuity. Does not check harnesses with mid-joints | Specially design for intermittent fault checking in harness with one to one connection (like FRC) with continuity. Does not check harnesses with mid-joints |
Select the part number below that corresponds to the quantity of test points required (How to calculate)
While contacting our team for placing an order or for enquiry, let us know about:
- 1. Tester Model
- 2. Number of points.